VIN and current brake evidence
Rotor, hat and clearance geometry
Pads, calipers and axle package
C/SiC manufacturing and inspection
Written component schedule and install plan
Vehicle-specific braking programme
Understand the system first, choose the required brake package, verify the exact vehicle configuration, then review vehicle applications and the documented C/SiC manufacturing process before requesting a quotation.
From material to component
Follow the preparation, machining and inspection topics. Each guide opens more photographs and a detailed explanation.
01 · Raw fibre control
Package and batch identification
View process →
02 · Material architecture
Parallel tow alignment across working width
View process →
03 · Sheet preparation
Full-width sheet alignment
View process →
04 · Ring formation
Circular architecture and shaped blanks
View process →
05 · Production control
Separated pallet and stack groups
View process →
06 · Pre-process inspection
Visible fibre architecture review
View process →
07 · Workholding
Central workholding and datum control
View process →
08 · Precision features
Programmed tool positioning
View process →
09 · Measured acceptance
Post-machining visual inspection
View process →Shop by vehicle brand
Browse existing vehicle application guides. Model names and year selections start a fitment review; they do not confirm compatibility.
911 (PCCB), Taycan, Panamera, Macan
488 GTB and other applications
Huracán, Urus
P1, Senna, Speedtail, Solus GT, W1
RS3, RS5, RS6, RS7, RSQ5, RSQ8, TT RS
A45 S, S63/S65 AMG, G63 AMG
5 Series, 6 Series
Cullinan, Ghost, Phantom, Wraith, Dawn, Spectre
Bentayga, Continental GT, Flying Spur
Corvette Z06, Z07
Range Rover, Sport, Evoque, Defender, Discovery
Hypercar applications
Hypercar applications
Shop by brake category
Open a focused catalogue page for complete kits, rotors, pads or calipers. Every order remains subject to VIN, axle, brake and wheel-clearance review.
Complete and axle-specific packages
Vehicle-matched C/SiC systems
Lightweight performance solutions
Front, rear and matched rotor sets
Matched compounds and pad shapes
Forged multi-piston configurations
Three supply formats
Select an axle-specific component or a coordinated full system. Every format is released against the same vehicle evidence and written component schedule.
Separate front or rear supply
Vehicle-specific C/SiC rotor assemblies can be supplied for the front axle, rear axle or as a matched set. Typical front diameters span 380–440 mm and rear diameters 350–410 mm, but thickness, offset, hat geometry and EPB compatibility are approved for the exact vehicle.
Verified friction package
Brake pads are selected for the confirmed rotor material and caliper shape. Optional forged 6-piston or 10-piston calipers can be quoted when bracket design, hydraulic balance, pad sweep and wheel-barrel clearance support the conversion.
One controlled component schedule
A complete package can include front and rear rotors, matched pads, forged calipers, braided lines, high-temperature fluid and titanium fitting hardware. Every included item and axle quantity is written into the approved quotation.
The same model and year can have different factory brake packages. Your quotation confirms the approved configuration and supplied components.
Read the fitment guide →Vehicle applications
Review representative applications, then confirm the exact vehicle, axle, factory brake configuration and wheel clearance before ordering.
View all applications
Rolls-Royce
2018–2024 · 440/410 mm reference upgrade
Mercedes-AMG
Front-axle configuration · quotation required
Porsche
2001–2024 · 380–410 mm front reference range
McLaren
2013–2015 · Factory caliper compatible
Bentley
400–440 mm front reference range
Mercedes-AMG
W463/W464 · Factory or forged caliper
Frequently asked questions
Clear answers about component supply, VIN approval, caliper compatibility, installation and worldwide shipping.
Yes. Rotors, matched pads and approved forged calipers can be quoted separately after the existing brake system and required axle are verified.
A model name does not confirm rotor thickness, offset, centre bore, hat depth, caliper clearance, wheel clearance or rear electronic parking-brake specification.
Some applications can retain the original calipers when rotor dimensions, pad shape and caliper sweep are compatible. Engineering review is required before approval.
Send the VIN, exact model and year, wheel size, front or rear axle requirement, photographs of the current rotors and calipers, and OEM part numbers when available.
Installation, torque procedures, brake-fluid work, bedding and final inspection must be completed by a qualified brake technician.
The quotation confirms the component list, inspection evidence, protective packing, insurance and selected air or sea cargo service for worldwide supply.
See how carbon-ceramic discs and original eight-piston calipers are presented for a full-size Range Rover enquiry. Inspect component layouts and discuss the rotor, caliper and pad requirements for your vehicle.
Model-year coverage comes from the supplied enquiry brief. Your VIN, existing brake configuration and wheel clearance must be reviewed before compatibility is confirmed.
Explore the Range Rover brake configurationRelated pages
Application
Application
Application
Application
Application
Application
Get In Touch
Send the VIN, exact model year, current brake photographs, wheel specification and required axle configuration for a vehicle-specific quotation.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international
Vehicle applications
Vehicle-specific rotors, complete kits, pads and calipers in one compact catalogue. Open a system for exact fitment and technical evidence.
RotorBMW · 6 Series GT G32
• OWNSILENT manufactured
• SKU: BSGCCFF1263
Complete KitBMW · 6 Series Gran Coupe F06
• OWNSILENT manufactured
• SKU: BSGCCFF1264
Complete KitBMW · 5 Series G30/G31
• OWNSILENT manufactured
• SKU: BSGCCFF1260
RotorBMW · 5 Series G60
• OWNSILENT manufactured
• SKU: BSGCCFF1261
Complete KitBMW · 6 Series Coupe/Convertible F12/F13
• OWNSILENT manufactured
• SKU: BSCCCFF1262
Complete KitBMW · 5 Series F10/F11
• OWNSILENT manufactured
• SKU: BSFCCFF125F
